Grower Tip
- Hang your light and fan from the roof bars at intersecting points — they hold up to 150lb (68kg), enough for a full 2x2 setup.
- Close the unused duct ports and use the front zipper cover to keep the tent fully light-proof during the dark period.
- Check on plants through the 25cm viewing window instead of opening the door, so you don't upset the climate inside.
Features
Waterproof 2000D oxford canvas with a front zipper cover and inner light seal blocks light leaking in or out.
Cross-patterned diamond mylar lines the walls to reflect and maximise output from your grow light.
22mm steel poles — thicker than standard 18mm — and matching corners hold up to 150lb (68kg) of equipment.
Includes two hanging bars plus a spare, so you can rig lights, fans and filters at intersecting points.
Sealable 4in and 6in duct ports, a 15 x 36cm side intake and a 25cm viewing window handle airflow and monitoring.
Comes with a waterproof floor tray, a detachable tool bag and a controller mounting plate with a no-leak cable passthrough.
-
1
Build the frame
Assemble the 22mm steel poles and corner pieces into the tent frame.
-
2
Fit the canvas
Slide the 2000D canvas over the frame and zip it up, seating the inner light-seal flaps.
-
3
Lay the floor tray
Drop the waterproof floor tray into the base to catch spills.
-
4
Hang your gear
Clip in the hanging bars and rig your light and any inline fan or filter at intersecting points.
-
5
Set up airflow
Run ducting through the 4in or 6in ports and open the side intake; close any unused ports for light-proofing.
-
6
Mount the controller
Fix your AC Infinity controller to the mounting plate and pass cables through the sealed passthrough.
How big is it and how many plants fit?
It measures 60 x 60 x 121cm (24 x 24 x 48in), a 2x2 ft footprint rated for around 2 plants. It suits small tents in a closet, spare room or garage where floor space is tight but you still want full climate control.
What size fan and filter do I need?
The tent has sealable 4in and 6in duct ports, so a 100mm (4in) inline fan and matching carbon filter are an ideal fit for a 2x2 space — enough to exhaust heat and scrub odour without being oversized.
How much can the hanging bars hold?
The 22mm steel frame and roof bars support up to 150lb (68kg) of equipment when hung at intersecting points, so lights, fans and filters can all hang safely inside.
What's included?
Beyond the tent and frame you get a waterproof floor tray, a detachable tool bag, an extra hanging bar (2 + 1), and a controller mounting plate with a no-light-leak cable passthrough.
Is it fully light-proof?
Yes — the 2000D canvas, a cover over the front zipper, inner ribbon light-seal stitching and closeable duct ports all work together to stop light leaking in or out for a clean dark period.
Which Cloudlab size should I choose?
This 422 is the 2x2 model for up to 2 plants. AC Infinity makes larger Cloudlab tents (such as 3x3, 4x4 and 5x5) for more plants and taller canopies — match the tent to your space and plant count.
Description
A grow tent designed to grow plants indoors by providing complete control over climate conditions.
Featuring a quick-view observation window, this grow tent uses a waterproof oxford canvas with a 2000D thickness for greater durability and light-proofing. Cross-patterned diamond mylar lines the surface of the inner walls, which will reflect and maximise output from your grow light.
An inner ribbon stitching creates a seal that lines the zipper inside the grow tent to ensure maximum reflectivity and prevent light leaking. This is paired with a protective cover that runs the length of the front zipper for further protection against intrusive lighting.
The duct ports can also close on either side to reinforce this light-proof sealing. Accessories include a waterproof floor tray, a detachable tool bag, additional roof hanging bars, and a mounting plate to install your controller onto the grow tent.
PREMIUM BUILD QUALITY
This growing tent is reinforced by its frame’s steel construction, utilising 22 mm diameter poles compared to standard grow tents’ 18 mm poles. The corner pieces share the same rigidity that keeps the tent upright and sturdier than others. This, along with its roof hanging bars, enables up to 150 pounds of grow equipment support when hung at intersecting points. A metallic finish protects the steel poles from long-term wear and tear while presenting a clean aesthetic.
APPLICATIONS
The CLOUDLAB series enables you to grow your desired plant year-round and is specially made for gardening indoors. Place it in any room in your home such as your closet, basement, guest room, or garage. Easily organise your grow accessories inside or outside of the tent using the highly convenient detachable tool bag. Opening the air venting screen or pairing the floor duct port with an intake fan will allow fresh air to enter the grow tent. Peel back the window flap to track progress while preserving the climate of the inner space.
KEY FEATURES
- An advanced grow tent designed to create optimal climate conditions for year-round plant cultivation indoors.
- Features durable frame that uses 50% thicker steel poles and carries 2x more weight than standard grow tents.
- 2000D canvas with front zipper cover prevents light leaks while diamond mylar amplifies light reflectivity.
- Future-ready design featuring controller mounting plate with passthrough for no light-leak cable management.
- 24” x 24” x 48” | 2 Plant Capacity | 2 (+1 Extra) Hanging Bars | Floor Tray & Detachable Tool Bag
This tent set up measures 60 x 60 x 121 cm
| Product Identification | |
| Manufacturer | AC Infinity Inc. |
| Product Name | CLOUDLAB 422 |
| Product Model | AC-CBA422 |
| UPC Code | 819137021532 |
| Product and Mounting Dimensions | |
| Tent Dimensions | 23.62" x 23.62" x 47.99" (60.0 x 60.0 x 121.9 cm) |
| Duct Opening Sizes | 4", 6" |
| Viewing Window Size | 9.84 x 9.84 in. (25.0 x 25.0 cm) |
| Side Intake Hole Size | 5.90 x 14.17 in. (15.0 x 36.0 cm) |
| Mounting Strap Length | 5.51 in. (140.0 cm) |
| Product Performance and Technical Specs | |
| Outer Tent Material | Oxford |
| Inner Tent Material | Mylar |
| Pole Material | Steel |
| Pole Thickness | 22 mm |
| Beam Weight Capacity | 68 kg / 150 lbs. |
| Hanging Bars | 2 (+1 Extra) |
| Plant Capacity | 2 |
| Product Manual | |
| Product Manual |
 PDF |
*Additional shipping may be required for this product post-purchase
Specifications
Estimate shipping
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.