Grower Tip
- Fit the five-way nozzle for even, room-wide coverage, or the elbow nozzle to push high-volume vapour in one direction.
- Use the VPD trigger, not just a humidity %, so the T7 adds moisture exactly when your plants' VPD calls for it.
- Fill it with distilled water only — it keeps the ultrasonic vaporiser clean and stops white mineral dust settling on your plants.
Features
A next-gen EC ultrasonic vaporiser digitally pulses water across up to 10 levels for fine, precise humidity control.
Onboard humidity and VPD triggers with timer programming add moisture exactly when needed, read via a corded sensor probe.
Includes an elbow nozzle for high-volume vapour in one direction and a five-way nozzle for even coverage all around.
A 15L tank with up to 10 output levels — about 1.3L an hour at the top setting, or up to 30 hours per fill on a gentle one — with auto shutoff when empty.
A specially sealed, water-resistant body with waterproof UIS ports runs at about 46 dBA on 100W, with a backlit display you can toggle off.
Part of the UIS platform: connect the AC Infinity app over WiFi or a UIS controller for dynamic triggers and schedules.
Designed to run on distilled water, which keeps the vaporiser clean and avoids mineral build-up and white dust.
-
1
Fill with distilled water
Fill the 15L tank with distilled water only.
-
2
Fit a nozzle
Attach the five-way nozzle for all-round coverage or the elbow nozzle to aim vapour one way.
-
3
Place the probe
Position the corded sensor probe at canopy height so it reads the humidity your plants feel.
-
4
Power it on
Plug in the included Australian power cord and switch it on; the backlit display shows the current settings.
-
5
Set your target
Set a humidity or VPD trigger and choose from up to 10 output levels for the growth stage.
-
6
Connect (optional)
For automation, connect the AC Infinity app over WiFi or link it to a UIS controller.
How long does a tank last?
It depends on the output level you set. On the highest of its 10 levels the T7 pushes about 1.3L an hour, which empties the 15L tank in around 11–12 hours; on a gentler setting a fill can stretch to a maximum of about 30 hours. It shuts off automatically when the water runs out.
Does it hold a humidity or VPD target by itself?
Yes. Onboard humidity and VPD triggers plus timer programming add moisture automatically, using the corded probe for readings, with up to 10 output levels. Link it to a UIS controller or the app for more dynamic triggers and schedules.
Why distilled water only?
Tap and mineral water leave scale on the ultrasonic vaporiser and can throw fine white dust into your space. Distilled water keeps the unit clean, protects the vaporiser and extends its life.
What nozzles are included?
Two: an elbow nozzle that directs high-volume vapour one way, and a five-way nozzle that spreads moisture evenly in all directions for wider coverage. Swap them to suit your layout.
Do I need the app or a controller?
No — it works standalone with its own probe and onboard controls. Connecting the AC Infinity app over WiFi, or a UIS controller, adds remote monitoring, dynamic triggers, grow cycles and schedules.
T7 or T3 — which size?
This is the 15L T7, built for larger grow rooms and higher output. For a small tent or a lighter humidity load, AC Infinity also makes the 4.5L Cloudforge T3. Both use the same smart VPD controls and UIS platform.
Description
A next-gen 15L humidifier designed with smart controls and targeted vapour delivery to obtain ideal humidity levels for successful plant growth.
Its body is specially sealed for enhanced water resistance, ensuring no water tank leakage to extend and preserve its long operational lifespan. The controller features onboard humidity and VPD triggering, which utilises a corded sensor probe for accurate readings, and timer programming. Once activated, the innovative EC ultrasonic vaporiser digitally pulses water to distribute moisture throughout your grow space. This degree of control, together with smart programming, will allow you to fine-tune your climate to facilitate healthy nutrient uptake.
This product is a part of the UIS™ platform of grow devices and smart controllers, designed to unite with the AC Infinity app over WiFi to achieve your ideal environment.
SMART HUMIDITY CONTROL
The environmental humidifier’s onboard controller is equipped with humidity and VPD triggers plus timer programming. The VPD triggers can intuitively generate humidity at the exact time needed to maintain optimal moisture levels. Digitally set up to 10 levels of condensation to generate precise levels of humidity for your plants in any stage of their growth cycle. You can connect this smart humidifier to UIS controllers to integrate with other grow devices and access more dynamic climate triggers, grow cycles, and schedules.
DESIGNED FOR GROWERS
This series was designed from the ground up for optimized moisture control in grow space environments. It includes an elbow nozzle to distribute high-volume moisture to a unidirectional area, as well as a five-way nozzle that evenly directs moisture in all directions for wider coverage. In addition to the specially designed seal, the body is built with waterproof ports that ensure no leakage into them when connecting UIS controllers. Also features a backlit display that can be toggled off to prevent night cycle disruption, and an automatic shutoff system that turns this humidifier off when its water supply is depleted.
KEY FEATURES
- Designed with smart controls and precision vapours to obtain optimal humidity levels for plant growth.
- Next-gen EC ultrasonic vaporiser can reach up to 10 levels of humidity for fine-tuned moisture control.
- Built with a specially designed water-resistant seal to prevent leakage and extend operational lifespan.
- Features VPD and humidity triggers, timers, a hidable backlit display, and auto-start with backup memory.
- Interchangeable nozzle heads included for flexible moisture distribution in one direction or a wide area.
THIS PRODUCT SHOULD BE OPERATED WITH DISTILLED WATER ONLY
Comes with Australian power cord and its own Probe ready to connect and use with AC Infinity Controller or by itself.
| Product Identification | |
| Manufacturer | AC Infinity Inc. |
| Product Name | CLOUDFORGE T7 |
| Product Model | AC-CFT7 |
| UPC Code | 819137023628 |
| Product Dimensions | |
| Total Length | 9.52 in. (24.2 cm) |
| Total Width | 10.23 in. (26.0 cm) |
| Total Height | 20.51 in. (52.1 cm) |
| Product Performance and Technical Specs | |
| Capacity | 3.96 gal (15 l) |
| Max Runtime | 30 hrs |
| Output Rate | 43.95 fl oz/h |
| Noise | 46 dBA |
| Wattage | 100 W |
| Voltage | 100-240V AC |
| Frequency | 50/60 Hz |
| Operating Temperature | 41 to 122ºF |
| Operating Humidity | 30% to 85% RH |
| Product Manual | |
| Product Manual |
 PDF |
Specifications
Estimate shipping
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.